Schrader TPMS Service Kits

Rubber Snap-In Service Kits

  • Easy pull-through application
  • Resistant to corrosion
  • OE quality

Service kits consists of: 

  • Rubber snap-in valve stem
  • Brass or nickel-plated valve core
  • Plastic cap
  • T-10 screw

Schrader Part Numbers: 20008, 20018, 20043, 20046, 20635

Fixed Angle Clamp-In Service Kits

  • Do not adjust to rim
  • Come in multiple assemblies
  • OE quality

Service kits consists of: 

  • Aluminum stem (in some assemblies)
  • T-20 Nut
  • Rubber Grommet
  • Nickel Plated Valve Core
  • Aluminum Seat (in some assemblies)
  • Plastic Cap
  • T-10 Screw

Schrader Part Numbers: 20002, 20003, 20004, 20005, 20006, 20007, 20009, 20010, 20011, 20012, 20013, 20014, 20015, 20016, 20017, 20019, 2022, 20023, 20030, 20031, 20032, 20050, 20051, 20052

Adjustable Clamp-In Service Kits

  • Adjust to fit more aftermarket rims
  • Come in multiple assemblies
  • OE quality

Service kits consists of: 

  • Aluminum stem (in some assemblies)
  • T-20 Nut
  • Rubber Grommet
  • Nickel Plated Valve Core
  • Aluminum Seat (in some assemblies)
  • Plastic Cap

Schrader Part Numbers: 20020, 20035, 20036, 20037, 20040, 20038, 20039, 20047, 20049, 20050

Fixed Angle Clamp-In Service Kits

  • Do not adjust to rim
  • Come in multiple assemblies
  • OE quality

Service kits consists of: 

  • Black, Anodized, Aluminum Stem
  • Black, T-20 Nut
  • Rubber Grommet
  • Nickel Plated Valve Core
  • Plastic Cap
  • T-10 Screw

Schrader Part Number: 34010

Service Pack Assortment Kits

The market's 12 most popular service packs conveniently located in a durable, organized tackle box assortment kit! Always have what you need and know where to find it!

Assortment Kits #20798 consists of 8 each of the following service kits: 

20004, 20007, 20009, 20013, 20014, 20018, 20020, 20023, 20030, 20032, 20036, 20049.

Assortment Kit #20898 consists of 10 each of the following service kits: 

20004, 20007, 20009, 20013, 20014, 20018, 20020, 20023, 20030, 20032, 20036, 20049. Additionally, the kit also includes 4 pcs of 34000 and 6 EZ-sensors. 

 

Schrader recommends that service pack components are replaced at every tire change using a genuine Schrader TPMS service packs. Please use Schrader supplied original replacement parts to invoke warranty. All components in the packs are intended for a one-time use only.

Why Replace the Valve Screw? 
The screw connects the valve to the sensor body. To ensure a secure connection, the screw was designed as a self-tapping threaded screw. Therefore, the screw cannot be used a second time. 

Why Replace the Grommet (for Clamp-in Sensors Only)?
The grommet is the principal sealing gasket between the stem and the wheel rim hole. The grommet is subjected to intense compressive forces and high temperatures, which cause the grommet to adapt its shape to the surface of the rim. In order to ensure a perfect air seal, we strongly recommend replacing the grommet together with the other components in the service pack at each tire change.

Why Replace the Rubber Valve (for Snap-in Sensors Only)?
The rubber valve is constantly exposed to different environmental influences, which leads to a certain aging over time. To ensure the safety of the valve, we recommend renewing it every time the tire is changed.

Why Replace the Nut (for Clamp-in Sensors Only)?
The anodized aluminum nut prevents the contact of two dissimilar metals with consequent possibility of galvanic corrosion. Torquing and retorqueing the nut multiple times may damage the threads to the point of failure. A new nut ensures accurate torquing. Galvanic Corrosion: Occurs when two dissimilar metals are in contact with each other. Please make sure to use only nickel-plated valve cores on aluminum valve stems.

Why Replace the Valve Core? 
Heat and compressive forces cause deterioration of rubber and plastic components. Replacing the valve core is vital in order to prevent slow leaks. CAUTION: Do not re-use valve core, make sure to replace with a new electroless nickel plated valve core for aluminum valves.

Why Replace the Cap?
The cap contains a rubber seal which prevents moisture and dirt from entering the stem and contaminating the seal of the valve core. The cap is an integral component in the sealing system of the TPMS sensor and should be replaced together with the rest of the components in the service pack at each tire change.